annular plate
英 [ˈænjələ(r) pleɪt]
美 [ˈænjələr pleɪt]
网络 环状板; 环形板; 环板; 边缘底板
双语例句
- Torsional vibration of annular plate concentrator with conical section
锥形截面环状聚能器扭转振动的研究 - 3D analytical solution for a piezoelectric rotating annular plate with functionally graded property
功能梯度压电旋转圆环的三维解析解 - The annular plate is subjected to an arbitrary axisymmetric loading.
环形板承受任意的轴对称荷载。 - Radial vibration equivalent circuit of annular plate concentrator with tapered section plane
锥形剖面环形聚能器径向振动等效电路研究 - Then, the variable thickness circular ( annular) plates on Winkler foundation are decomposed into a series of uniform circular and annular plate elements and the global transfer matrix formulae of the variable thickness circular and annular plates are obtained by use of transfer matrix method.
然后将Winkler地基上的变厚度圆（环）板划分成一系列的等厚度的圆板和环板单元，应用传递矩阵原理得到变厚度圆（环）板的整体传递矩阵公式。 - Static Analysis of Circular and Annular Plate
圆板及环板的静力分析 - The natural frequency and vibration mode of the stator annular plate in free conditions are analyzed using finite element, and the results are given.
并利用有限元方法分析了定子板在自由状态下的固有频率及固有振型，给出了分析结果。 - A Numerical Research on the Postbuckling Behavior of an Annular Plate under Co-planar Compression and Lateral Loads
面内压缩载荷和横向载荷联合作用下环板的后屈曲数值分析 - Based on the analytical solutions, the transfer matrixes of circular and annular plate elements with uniform thickness were derived.
基于这些解析解，导出了等厚度圆板和环板单元的传递矩阵。 - Nonlinear Analysis of Thin Current-carrying Annular Plate with Variable Thickness in the Electro-magnetic Field and Mechanical Load
载流变厚度环形薄板在电磁场和机械载荷作用下的非线性分析 - Magneto-Elastic Stress and Deformation of Current-Carrying Thin Annular Plate
载流环形薄板的磁弹性应力与变形分析 - Axis symmetrical radial vibration of a thin annular plate with tapered section plane is studied and the equivalent circuit is derived by using electromechanical analogy method. Based on the circuit, the resonant frequency equation are obtained.
基于机电类比原理，给出了锥形剖面薄圆环形聚能器的轴对称径向振动等效电路，由等效电路得出了其径向共振频率方程。 - Take the plastic limit analysis of annular plate with inside or outside cantilever end as examples, the simplified calculation method and corresponding results were given out in the paper.
文中分别以具有内悬臂或外悬臂的环板的塑性极限分析为例，给出简化计算的方法及结果。 - The optimal design of minimax deflection of an annular plate is studied in this paper.
本文讨论环形板的最大挠度极小化的优化设计。 - Based on dimensionless governing equations of an elastic shell, nonlinear vibration of a structure composed of a thin annular plate and a shallow conical shell under the action of uniform transverse load is studied.
从弹性壳体的无量纲控制方程出发，研究了一类薄环板与扁薄锥壳组合结构在横向均布载荷和温度载荷作用下的大挠度非线性振动问题。 - So far there is no investigation for nonlinear buckling of an annular plate subjected to uniformly radial thrust.
均布边缘径向力作用下环形薄板非线性屈曲迄今尚未有研究成果。 - This paper briefly describes the basic principle of travelling wave ultrasonic motor and makes a comparison between the finite element method and the classic vibration theory in analyzing the stator composite annular plate.
简述了行波超声马达的基本原理，比较了定子复合圆板分析中有限元和经典振动理论两种方法的优缺点。 - Analysis and Treatment of Cracks in Annular Plate of Barrel Structure
筒体结构环形板裂缝分析与处理 - The mechanism of thin-type ultrasonic motor, and the relation between the disposing of piezoelectric annular plate and exiting signals are analyzed, and the excitation of the stator vibration mode is discussed.
论述了薄型超声电机的工作机理。分析了电机压电片的布置与激励信号的关系，探讨了定子弯曲模态的激发问题。 - In this paper, using the solution of initial parameter form of small deflection theory of thin annular plate and the stepped reduction method, we obtain the calculation formulas of thickness distribution of equi-strength annular plates and carry out several examples under usual used boundary conditions.
本文利用小挠度环形薄板的初参数形式解和阶梯折算法，得到了任意边界条件下的等强度环形板的厚度分布计算公式。计算了一些常见边界条件下的实例。 - Large deflection of structure composed of thin annular plate and shallow conical shell subjected to lateral and temperature loads
薄环板与扁薄锥壳组合结构在横向载荷和温度载荷作用下的大变形问题 - Non-axisymmetric buckling analysis of an annular plate
环形板的非轴对称屈曲分析 - Effect of Initial Imperfections in Geometry on the Elastic-Plastic Stability of a Thin Annular Plate
初始几何缺陷对薄圆环板弹塑性稳定性的影响 - Elastic and plastic parametric solution of annular plate by bending
环形板受弯的弹塑性参数解 - Analysis of the elastic jump of the structure composed of circular plate, conical shallow shell and annular plate
圆板扁圆锥壳圆环板组合结构的弹性突跳分析 - Checked by the experimentation and numerical computation of FEM, it is shown that the theoretical values basically agree with the experimental results, which may provide a kind of convenient and effective analytical method for the engineering design of the radial vibration of disc or annular plate concentrator.
利用FEM进行了数值模拟，并从实验上进行了验证，理论与实验符合较好，为超声径向振动盘形聚能器的工程设计提供了一种便捷的分析方法。 - Magneto-elastic analysis of annular plate with fixed constraint of inner edges corner
内边界转角固定环形板的磁弹性分析 - The bottom node of a cylindrical metal tank consists of bottom shell course, fillet weld and annular plate, and the strength design of the bottom node is of great importance to the whole tank.
圆柱形金属油罐下节点包括罐壁底圈板、角焊缝和罐底边缘板，这三部分的强度设计是整个油罐强度设计的关键。 - A study has been carried out on dynamic response of annular plate installation for cementing surface casing by structural dynamics analysis and according to the status and characteristics of present offshore cementing operations.
应用结构动力学分析方法，结合目前海上表层固井作业的现状和特点，对表层固井环板装置的动力响应进行了研究。 - Analysis of results showed that: With the Central Board of the increased width and thickness, the bearing capacity of the node area has significantly increased, indicating the strengthening of the annular plate width and thickness are affected by a major factor in our performance.
分析研究结果表明：随着环板宽度和厚度的增大，节点区的承载力有明显增加，加强环板的宽度和厚度是影响其受力性能的主要因素。